LE-01MW

Счетчик LE-01MW предназначен для измерения электрической активной и реактивной энергии в двух направлениях (А± или А+, R+), организации многотарифного учета в однофазных цепях перем. тока, выполнен в пластмассовом корпусе с ЖКИ. Крепление на DIN-рейку, занимает место 1 модуля. Ном. напряж. 230 В, сила тока 5 (100) А, интерфейс RS-485 (Modbus RTU).
Для технического учета.
В наличии.

le-01mw (frontal)
le-01mw (gabarit)
le-01mw (diagram)
скачать руководство
Производитель:  F&F
Артикул: СОФ-0200

2200 грн.
Описание

Product description

1-phase, 2-wire, tariff,  MID compliance
LE-01MW is an electronic, compliant with the MID Directive, single-phase electricity meter, designed for measurement in a 2-wire direct system.

Functioning
The built-in real-time clock allows energy consumption to be measured with different tariff zones.
The meter is equipped with RS-485 communication interface with Modbus RTU protocol allowing remote reading and configuration of the meter.

Conformity

Directive MID 2014/32/EU
Certificate number: SGS 0120/SGS0305

Characteristics of the device
* 1-phase energy meter;
* direct measurement up to 100 A;
* DIN rail mounting (1 module);
* operate in one of two measurement modes:
– active and reactive energy measurement,
– measurement of active energy consumed and supplied to the grid
* energy measurement in 4 tariff zones;
* built-in real time clock with battery backup to switch tariff zones;
* 8 time schedules dividing the day into tariff zones;
* it can settle energy according to schedules specific for business days and weekends;
* it can divide year into 8 time intervals; in each interval the energy (for weekdays) can be settled according to a different schedule;
* indication of network parameters (voltages, currents, active power, reactive power, apparent power, power factor, frequency);
* compliance with MID;
* RS-485 port;
* Modbus RTU protocol;
* backlit LCD display;
* the possibility of a local reading of the indication of energy consumption also in the case of a power failure of the meter.

Data sheet

Type single-phase
ports RS-485
Communication protocol MODBUS RTU
Compatibility MID Directive 2014/32 / EU
Reference voltage 230 V AC
Current current 5:00 AM
Maximum current 100 A
The minimum measured current 0,02 A
Counter's own consumption 8 VA; 0,4 W
Scope of indication of the abacus 6 digits
Counter constant 100; 1000; 2000 imp//(kWh/kvarh)
Accuracy class B
Installation 1-phase, 2-wire
Nominal frequency 50 Hz
Insulation protection class II class
Measured voltage 100÷289 V AC
overload 30×lmax/10 ms
Terminal pluggable terminal blocks 25 mm²
Working temperature -25÷55°C
Dimensions 1 module (18 mm)
Assembly on rail 35 mm
Ingress Protection Marking IP51

Дополнительная информация